AMSOIL Synthetic Anti-Wear Hydraulic Oil – ISO 32

AMSOIL Synthetic Anti-Wear Hydraulic Oil – ISO 32 protects hard-working hydraulic systems from the stress of high-pressure, high-load, and heavy-duty operations. Remains fluid in cold temperatures for immediate cold-weather flow. Special anti-wear additives and rust inhibitors provide optimum protection to expensive equipment.

Buy Now

Description

AMSOIL Synthetic Anti-Wear Hydraulic Oil – ISO 32

AMSOIL Synthetic Anti-Wear Hydraulic Oil – ISO 32 are shear-stable, long-life lubricants based on high-quality synthetic oil technology. These oils are formulated with a premium additive system that inhibits oxidation to help prevent acid formation and viscosity increase and inhibit rust and foam (providing smooth hydraulic operation). AW Oils contain a very effective zinc-based anti-wear/antioxidant additive which controls wear in high-speed, high-pressure vane and gear pumps while meeting the lubrication requirements of axial piston pumps with bronze-on-steel metallurgy. Improved pump efficiency can increase hydraulic power, reduce fuel consumption and improve productivity. AW Oils are designed for long life and can typically reduce maintenance costs by extending drain intervals and reducing labor costs, repairs and downtime.

AMSOIL Synthetic Base Oil Technology

AMSOIL Synthetic Anti-Wear Hydraulic Oil – ISO 32 resists thermal and oxidative breakdown, reducing varnish deposits. The very high viscosity indices, low pour points, and lack of paraffin (wax) make these good all-season lubricants well-suited for high and low-temperature extremes. At high temperatures and pressures, AMSOIL AW Series Oils provide a good lubricating film and protect components against wear. During cold-temperature operation, equipment starts easier and the need for preheating with sump heaters is reduced. The AW Series base oils also readily separate from water, preventing oil/water emulsions that inhibit lubrication and allowing for longer lubricant life and easier water drainage from the sump.

Performance Features

  • Antiwear protection for high-pressure systems
  • Recommended for gear, vane, and piston pumps
  • Contain rust, oxidation, and foam inhibitors
  • Designed for extreme-temperature operation
  • Hydrolytically stable and readily separates from water

Application Recommendation
The correct viscosity grades of AMSOIL Synthetic AW Series Anti-Wear Hydraulic Oils are recommended for high- and low-pressure gear, vane, and piston stationery and mobile hydraulic systems. They are excellent for general-purpose use where extended drain intervals are desired and in severe-duty operations where temperature extremes are encountered.

AMSOIL AW Series Oils are compatible with hydraulic system seals, petroleum hydraulic oils, and most synthetic hydraulic oils*. For optimum performance, it is recommended the system be thoroughly drained and, if warranted, cleaned prior to installation. Oil analysis is recommended to maximize oil drain intervals.

* Not compatible with phosphate ester, silicone, or water-based fluids.

AMSOIL recommends the Synthetic AW Series Hydraulic Oils for use where the following specifications are required:

  • Denison HF-0, HF-1 and HF-2
  • Vickers M-2950-S and I-286-S
  • Cincinnati Milacron P-68, P-69 and P-70
  • U.S. Steel 127
  • Racine, variable volume vane pumps
  • DIN 51524, Parts 2 and 3 HLP22-HLP46
  • SEB 181222 HLP22-HLP68
  • ASTM D-6158 HV
  • AFNOR E 48-603*
  • Ford M6C32
  • GM LH-04-1, LH-06-1 and LH-15-1
  • Lee Norse 100-1
  • Jeffrey No. 87
  • BF Goodrich 0152
  • Commercial Hydraulics*

* Except for PM-500 series silver-containing pumps which require R&O additive systems.

AMSOIL PRODUCT WARRANTY
AMSOIL products are backed by a Limited Liability Warranty. For complete information visit www.amsoil.com/warranty/.

HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended application and according to the recommendations in the Safety Data Sheet (SDS). USA and Canada are available upon request at 715-392-7101 or on the AMSOIL Website. Keep Out of Reach of Children.

Technical Specifications

SDS

Download the SDS

Data Bulletins

Download the Data Bulletins

Warranty

Download the Warranty

Reviews

There are no reviews yet.

Be the first to review “AMSOIL Synthetic Anti-Wear Hydraulic Oil – ISO 32”

Related Products